We are shipping orders out!  
The Albuquerque Retail Store is OPEN!

Paragon Silver Clay Kiln SC-3

SKU
PKSC-3

PARAGON SC-3 SILVER & GLASS KILN

***This item is not stocked, it will ship direct from the manufacturer. Please anticipate delays.

Chamber size is  7.75 x 8 x 7.75 inches
The digital SC-3 kiln fires silver clay, decals, china paint, enameling, and glass in minutes up to 2000°F. The SC-3 is popular with seminar teachers because it fires so fast, plugs into a 120 volt outlet. The SC-2, for a digital kiln, is surprisingly affordable. It fires automatically at the rate and temperature you enter. A large, brightly lit display prompts for firing rate, temperature and hold time. Use the hold feature to automatically soak any type of  silver-clay to its recommended time. The ceramic fiber firing chamber is wrapped in a steel inner case. The outer steel case remains cool due to the layer of air between it and the inner case. In addition, the case is slotted for air circulation. Electrical components, located in the base, stay cool even at extended hold times. The fast-firing element is embedded in the firing chamber shell. The SC-3 heats from the sides and back. Each SC-2 includes a 1/4” thick ceramic fiber shelf.

The digital SC-3 kiln fires silver clay, decals, china paint, enameling, and glass in minutes up to 2000°F. The SC-3 is popular with seminar teachers because it fires so fast, plugs into a 120 volt outlet. The SC-2, for a digital kiln, is surprisingly affordable. It fires automatically at the rate and temperature you enter. A large, brightly lit display prompts for firing rate, temperature and hold time. Use the hold feature to automatically soak any type of  silver-clay to its recommended time. The ceramic fiber firing chamber is wrapped in a steel inner case. The outer steel case remains cool due to the layer of air between it and the inner case. In addition, the case is slotted for air circulation. Electrical components, located in the base, stay cool even at extended hold times. The fast-firing element is embedded in the firing chamber shell. The SC-3 heats from the sides and back. Each SC-2 includes a 1/4” thick ceramic fiber shelf.

SC-3 Features

  • On/off toggle switch
  • Built-in base; no extra stand needed
  • Door opens 180 degrees for easy loading
  • The case is slotted for air circulation.
  • Electrical components in the base stay cool even at extended hold times.
  • The embedded element heats from the two sides for improved heat distribution.
  • Top vent complete with tapered plug for lost wax casting
  • Includes a 1/4” thick ceramic fiber shelf
  • Optional SC-3 glass view port
  • Optional 6 1/2” wide bead door with mandrel holder
  • Colorful 28-page kiln instruction manual (In addition, the kiln also comes with a separate controller manual.)

The SC-3 can ship by UPS for lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely.

  • Image
    Color
    Price
    QTY
  • Black

    Regular Price: $1,329.25

    Sale Price $1,262.79

    35 Lbs.
    • Blue

      Regular Price: $1,329.25

      Sale Price $1,262.79

      35 Lbs.
      • Berry

        Regular Price: $1,329.25

        Sale Price $1,262.79

        35 Lbs.
        • Jade

          Regular Price: $1,329.25

          Sale Price $1,262.79

          35 Lbs.
          • Navy

            Regular Price: $1,329.25

            Sale Price $1,262.79

            35 Lbs.
            • Purple

              Regular Price: $1,329.25

              Sale Price $1,262.79

              35 Lbs.
              • Hot Pink

                Regular Price: $1,329.25

                Sale Price $1,262.79

                35 Lbs.
                • Turquoise

                  Regular Price: $1,329.25

                  Sale Price $1,262.79

                  35 Lbs.
                  OR

                  These product(s) can be added to your kiln as it is Manufactured.

                  • INFO
                  • SPECS
                  • RELATED
                  • REVIEWS

                  • The Amazing Digital Controller: The reliable Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.

                    Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon Kilns

                    • Design programs with up to 8 segments (steps) in Ramp-Hold mode.
                    • Fire to a single temperature at a single speed in the simplified Single Speed mode.
                    • Ramp-Hold mode can store 4 programs.
                    • Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
                    • Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
                    • Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.
                    • Add Hold Time during firing without having to stop the kiln to reprogram.
                    • Control both heating and cooling in Ramp-Hold.
                    • Program Review lets you check the program you are about to fire.
                    • Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
                    • Temperature display throughout firing and cooling in your choice of °F or °C
                    • Thermocouple Offset adjusts the thermocouple readout.
                    • Set the Delay to turn on the kiln later to suit your schedule.
                    • Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
                    • 12 Month Warranty
                    • LED Lights show whether you are in program, review, or firing mode.
                    • Colorful, illustrated instruction manual (separate from the kiln manual). Download it from the “Additional Information” section below to review these features in more detail.
                    • Handy Quick Start Guide

                    Max. Temperature

                    2000F
                    1093C

                    Amps

                    15

                    Phase

                    1

                    Watts

                    1800

                    Nema

                    5-15R

                    Breaker Size

                    20

                    Circuit Copper Wire Size

                    12 gauge

                    TUV tested to CSA and UL Standard 499

                    Y

                    CE

                    Y

                    Control Type


                    Sentry Xpress 4.0 Digital 3-Key

                    Voltage

                    120

                    Hertz

                    60

                    Nema Details







                    Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

                    The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

                    Kiln Type

                    Front Loading Square

                    Sides

                    4

                    Understanding Chamber Measurements

                    Chamber Volume

                    0.28 CU.FT.
                    7.93 litres

                    Chamber Width

                    7.75 IN
                    197 mm

                    Chamber Depth

                    8.00 IN
                    203 mm

                    Chamber Height

                    7.75 IN
                    197 mm


                    The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

                    Outer Size

                    13.30W x 14.00D x 17.00H Inches
                    338W x 356D x 432H mm

                    Ship Size

                    22.00W x 17.00D x 19.00H Inches
                    559W x 432D x 483H mm

                    Ship Weight

                    40.00 Lbs.
                    18.14 Kg.

                    Ship Method & Notations

                    This Kiln Ships Via UPS/FedEx





                    Part Number

                    03211J1B00   * Base Model